Sunday, February 24, 2013

Start with shelves

Starting on the shelf build. As you can see I'm using this wire shelving, but due to the weight that it will be holding I'm reinforcing it with 3/4" plywood and 4x4's. I had to buy a 4x4 for this, but I got all the plywood free from somebody who was just going to throw it out. You can't see them in this picture but there's a couple lengths of 4x4 under the shelf. The wood for the bottom shelf has been cut a little larger than the wire shelf to accommodate two ten gallon aquariums side by side.

No comments:

Post a Comment